EGR delete blanking plate kits with gaskets for Opel Vauxhall CDTI Saab TiD Fiat Alfa Lancia 1.9 JTD BOP18
$21.00
- For off-road/racing use only. Check local laws before use. Purchase constitutes acceptance of these conditions.
Description
Material: 4mm aluminum
EGR valve blanking plates with gaskets to removing the whole EGR system
This kit also contains a stainless steel joining pipe with clamps for joining the coolant hoses on water cooled EGR valves. After you’ve installed a set, must use cheater simulator so it doesn’t show EML error.
APPLICATION:
for Opel / Vauxhall with 1.9 CDTI engines:
for Astra H (engines: Z19DTJ 16V 120HP, Z19DTH 16V 150HP)
for Signum (engines: Z19DTH 16V 150HP)
for Vectra C (engines: Z19DTH 16V 150HP)
for Zafira B (engines: Z19DTH 16V 150HP)
for Saab with 1.9 TiD engines:
for 9-3 (engines: Z19DTH 16V 150HP)
for 9-5 (engines: Z19DTH 16V 150HP)
for Fiat with 1.9 JTDM engines:
for Stilo 1.9 JTDM 16V (engines: 103kW/140HP, 93kW/126HP, 110kW/150HP)
for Croma 1.9 JTDM 16V (engines: 110kW/150HP, 2.4 20V 147kW/200HP)
for Alfa Romeo with 1.9, 2.4 JTDM engines:
147 1.9 JTDM 16V (engines: 103kW/140HP, 93kW/126HP, 110kW/150HP, 100kW/136HP)
156 1.9 JTDM 16V (engines: 103kW/140HP, 93kW/126HP, 100kW/136HP)
156 2.4 JTDM 20V (engines: 129kW/175HP, 120kW/163HP)
159 1.9 JTDM 16V (engines: 110kW/150HP)
159 2.4 JTDM 20V (engines: 147kW/200HP)
166 2.4 JTDM 20V (engines: 110kW/150HP, 120kW/163HP, 129kW/175HP)
for Lancia with 2.4 JTDM engines:
Thesis 2.4 JTDM 20V (engines: 120kW/163HP)
Very quick installation.
You need just to loosen screws, put blanking plate with the gasket and then screw them down.
Scope of supply
1 x blanking plate kits (as shown)
Note：
Please allow a little difference due to manual measurement
We take no responsibility in teaching you how to install.
Professional installation is strongly recommended. No instruction is Included
Additional information
| Weight | 180 g |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.